1.5" Tri Clamp RIMS Tube Kit w/ Cam Locks
RIMSstands for Recirculating Infusion Mash System.RIMS tubeis the heater portion of the system, it is just one part of a complete RIMS system. In short, a RIMS type sustem pull s water from your mash through the RIMS tube, the ewater is heated in your RIMS tube to the correct temperature and the heated water is returned to your mash.
This RIMS Tube is designed to maintain a constant mash temperature, also it can be used for step mashing and also mash-out.
It features all tri clamp fittings for easy disassembly and cleaning. When disassembled, you can pass a brush clean through the entire tube body. The inlet and outlet feature 1.5"Tri Clamp ferrules.
The body diameter is 1.5¡± OD tubing with a 1.375" ID, providing for an improved flow rate across the element to reduce any possible wort scorching.A 16¡± overall length of the RIMS tube itself allows for almost any heater element to be installed and a unique 2-piece design allows the inlet and outlet to be rotated to any angle from each other that you want.
The element is constructed of shiny 304 stainless steel and will look like new for years.It features an integrated 1.5" Tri-Clamp ferrule as well as an integrated L6-30P twist lock plug! No longer do you have to figure out how to enclose your heater element to make it safe. Any L6-30R twist lock receptacle will connect to this element for a perfect fit.It is an ULWD (Ultra Low Watt Density) element, so no worries about scorching your wort.
ThisRIMS tube Kit includes:
1 x 1.5¡± Tri-Clover 2-piece RIMS tubes
5 x 1.5¡± Tri-Clover Clamps
5 x 1.5¡± Silicone Gaskets
1 x 1.5"Tri-clover Heating Element 120v/160w with integrated L6-30P Plug
1 x 1.5"Tri Clamp End with 1/2 Female NPT Adapter
2 x 1.5" Tri Clamp x 5/8" Hose Barb
For a complete RIMS system you will need to plan for circulation through your RIMS tube and through your mash tun. And you will need to provide accurated temperature control. In addition to a RIMS tube you will need:
1. Circulaion Pump
We recommend our Stainless Head Magnetic Pump MP-15RM.
2. RIMS Tube Controller
We recommend Ranco Digital Temperature Controller or Inkbird ITC-308 Digital Temperature Controller. A good temperaure sensor mounted at the outlet side of your RIMS tube. We recommend and use a PT-100 type sensor becuse a PT-100 is the most accurate and stable sensor at mash temperature.
3. False Bottom.
It can be sued for your mash tun that flows well. We accept custom false bottom. The Bazooka screen is the economical solution.
6" L Bazooka Screen
12"L Bazooka Screen
4. A tap at the bottom of your mash tun.
We offer a varity of ball valve. You can choose one of them on our ball valve page
5. 1/2" ID Hose
We recommend our 1/2"ID silicone hose and reinforced silicone hose.
1/2"ID Silicone Hose
1/2" ID Reinforced Silicone Tubing
6. 1/2" Fittings
We offer a varity of the fittings for this RIMS tube system, such as Quick Disconnect, Hose Barb, weldless bulkhead. You can get all the parts you need in our store.
7. Mash Tun
You can use plastic cooler, plastic bucket or stainelss kettle as the Mash Tun. Our RIMS tube can work well all the Masn Tun.