![](https://ae01.alicdn.com/kf/H244d20c89e6649ea8eb11ca10dc9af160.jpg)
Module parameters:
Input voltage: DC5-30V
Input current: 8A (MAX) for peak 10A (6A working for a long time)
Quiescent current: 4mA (different operating voltage will cause errors)
Output voltage: 1.25-30V continuously adjustable
Output current: 10A (MAX) (long-term natural heating within 5A)
Output current range: 0.2-10A
Operating temperature: -40 to +85 degrees
Working frequency: 150KHz
Conversion efficiency: typical 91% (12V to 12V5A) maximum 93%
Overcurrent protection: where
Short circuit protection: (Limited protection)
Over-temperature protection: (Automatically reduces output voltage after overheating)
Input reverse polarity protection: None, (if necessary, please enter a diode in series)
Output anti-backflow: Yes, no charging and blocking diode are required.
Connection: terminal output, (IN is input, OUT output)
Output current adjustment method:
1. CV potentiometer adjustment, according to your load requirements, the output voltage is set to the voltage value you need.
2, CC potentiometer is located about 30 turns counterclockwise (that is, the output current is set to the minimum), connected to the LED,
Potentiometer CC is tuned to the required current. After charging the battery, the battery is completely discharged,
Then output, adjust to the current CC you want,
(Be sure to fully discharge the battery before allowing the transfer, as the battery power is left at a higher level,
The charging current is small. )
Please do not use the short-circuit current transmission method, the circuit structure of the module cannot be short-circuit transmission method
Package Included:
1 *Automatic boost step-down adjustable power module
![](https://ae01.alicdn.com/kf/Hc82d2057f10341189a02b45357f4da47O.jpg)