|
![](https://ae01.alicdn.com/kf/HTB1bScUbNuaVKJjSZFjq6AjmpXam/1200W-20A-DC-8-60V-12-80V.jpg) aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/HTB1bScUbNuaVKJjSZFjq6AjmpXam/1200W-20A-DC-8-60V-12-80V.jpg) ![](https://ae01.alicdn.com/kf/HTB1Re9sa.RIWKJjSZFgq6zoxXXaB/1200W-20A-DC-8-60V-12-80V.jpg)
- Ãâ·Â Àü·Â: >500W
- Ãâ·Â À¯Çü: single
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
1200W DC-DC boost constant current high-power step-up module car-regulated solar charging product description: Large heat sink design (length 85MM * wide 62MM * high 64MM), and do black oxidation (black oxidation heat effect is excellent). Support 12-60V wide input voltage, 12-80V adjustable wide output voltage, ultra low input and output voltage. Taobao exclusive launch: output constant current way, do not miss Oh! (Current Taobao similar module current regulation can only adjust the input current, so this can only be used when the input over-current protection, and can not control the output current, only the output current adjustable is the real constant current) Module parameters: Module name: 1200W boost constant current module Module nature: non-isolated step-up module (BOOST) Input voltage: 8-60V Input current: 20A (true 20A input, Taobao many sellers almost all virtual standard, an inductor, a MOS power tube can reach 20A, killing me do not believe) Static operating current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase) Output voltage: 12-80V continuously adjustable 12-80V adjustable Output current: 20A MAX more than 18A Please strengthen the heat (with the input and output pressure, the greater the greater the smaller the output current) Constant current range: up to 20A Output power: = input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W, Input 36V * 10A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W For more power, you can use the two modules in parallel, such as the output to 30A, you can use two modules in parallel, The current of each module can be transferred to 15A. Operating temperature: -40 ~ +85 degrees (when the ambient temperature is too high, please strengthen the heat) Operating frequency: 150KHz Conversion efficiency: up to 95% (efficiency and input, output voltage, current, pressure related) Overcurrent protection: Yes (with current limiting current regulation, adjustable output current limit, current exceeds current limit, automatically reduces output current to minimum 5A, depending on the load nature of the current will be different.) Short circuit protection: Yes (input 20A fuse) Dual short circuit protection, use safer. Input Reverse Protection: None, (if required, enter the string into the diode) Output anti-anti-irrigation: Yes, for charging do not need to add anti-anti-diode. Installation: 4 3mm screws Wiring method: terminal-free solder output Module size: length 85mm wide 63mm high 64mm Applications: 1, DIY a power supply, the input can be 12V, the output can be 12-80V adjustable. 2, for your electronic equipment power supply, you can set the output value according to your system voltage. 3, as a car power supply for your laptop, PDA or a variety of digital products. 4, DIY a high-power notebook mobile power: coupled with a large capacity of 12V lithium battery pack, so that your books where you can light up where 5, solar panels regulator. 6, to the battery, lithium battery and other charges. 7, drive high power LED lights. Instructions: First, the input voltage range selection: factory default is 12-60V input Second, the output voltage and current regulation method: 1, adjust the output voltage: adjust the CV potentiometer, according to your battery or LED, the output voltage is set to the voltage you need. Such as 10 string LED voltage regulation 37V, four strings of battery adjustable 55V and so on. 2, adjust the output current: counterclockwise set CC potentiometer 30 laps or so, the output current is set to minimum, connected to the LED, adjust the CC compiler to the required current. For the battery charge, the battery after the termination of electricity, then receive the output, adjust the CC to the current you need, (for charging must be used when the battery is fully charged, because the battery remaining power More, the smaller the charging current.) Please do not use short-circuit way to adjust the current, step-up module circuit structure can not be short-circuit way to tune. 3, over-current regulation: designed for the output short-circuit protection, which means that when the output short circuit exceeds the set short-circuit limit current, the power off output is the minimum value of 5A, depending on the load is different, thus protecting the power supply module and The electrical equipment is not damaged. Adjustment method: first set the protection point of the current, if it is 8A protection. Use the output current to adjust the output current to 8A, and then adjust the "overcurrent adjustment" CL potentiometer (counterclockwise rotation) to the output current suddenly drop to a minimum. Some of the overcurrent is 8A. (Note that if the protection point of the current is less than the current required by the device when the power will be protected, it is recommended that if you do not need overcurrent protection is best clockwise turn around 30 or so to the maximum) 3, imported 27mm large iron silicon aluminum magnetic ring, thick copper enameled wire double and around, thick aluminum radiator, so that the whole module heat lower, enter two 470uF / 100V electrolytic capacitor, the output of three 470uF / 100V low Resistance to electrolysis, the other output ripple lower. Inductive vertical design more stable, minimal interference, replaceable fuse, double protection more reliable. The overall setting is very reasonable, structural design is very elegant.
![2](https://ae01.alicdn.com/kf/HTB1NXKPhgoQMeJjy0Foq6AShVXaa.jpg?size=346807&height=750&width=750&hash=117476d13c257ed29e6c7126f634e492) ![3](https://ae01.alicdn.com/kf/HTB1vKwVbNuaVKJjSZFjq6AjmpXaD.jpg?size=150552&height=800&width=800&hash=060a2a36e58522abca0d2779c9d9efce)
-
Payment
1. Please make sure your payment account is available before you bid the item.
2. All payments should be cleared within 7days after you receive the item. If you really have difficulty in paying the item, please contact us firstly, we will help to solve it.
3.If you have any special request about the details of item, please leave a note in your order.
4.If you A large number of purchasing pls contact us ,will give you a best price
Warranty
1. One year guarantee.
2. If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition).
3. We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost.
Shipment
1. We can ship the products all the world.
2. DHL, FedEx, EMS, China Post, singapore post ,Hongkong Post are all available. all have tracking number
3. The item will be sent out with 3days after receiving the payment.
4. Please make sure your delivery address and contact telephone number are correct when you bid the item.
5. You can track the situation of your product on website after they are shipped out.
Feedback
1. your feedback is very important to our development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. Thanks a lot for your time.
2. Our program will leave back the same feedback to you after your positive feedback.
3. Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems
|
|
|
|
|