This Collar suit for most Dogs,the size for the ring is:20CM-60CM(+)
Mini | 20-22 | 25-30 | 19 | Chihuahua,Yorkshire Temier |
Small | 20-24 | 29-36 | 23 | Chihuahua,Yorkshire Temier,poodle,pomeranian |
Medium | 23-28 | 35-42 | 28 | Maltese dog,shih T zu |
Large | 27-31 | 41-47 | 31 | Miniature Schnauzer,Pekingese |
Large | 30-34 | 46-53 | 35 | Schnauzer,English Cocker Spaniel |
Large | 33-37 | 52-59 | 40 | Beagle |
Huge | 43-48 | 76-84 | 60 | Husky |
| 45-52 | 88-97 | 65 | Labrador Retrivel |
| 52-62 | 92-100 | 70 | Golden Retriever,Old English Sheepdog |
Common Size of different dogs:
Large dog(Body height above 61CM,Weght above 40KG)
Medium Dog(Height 40.7-61CM,Weight 11-30KG)
Small Dog(Height 25.5-40.7CM,Weight 4-10KG)
Mini Dog(Height under 25CM,Weight under 4KG)
Features
1. Big LCD display.
2. 100 levels (optional)/static/vibrate/beep
3. The level can be altered by use of up & down button.
4. A tone button activates a lone on the Collar Receiver.
5. The system can be used up to 3 receivers(expandable 3 dogs).
6. The Collar Receiver will turn off if it is unused for 4 minutes.
7. Any movement will activate the collar receiver into STANDBY MODE.
8. The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes.
9. Rechargeable the collar receiver and waterproof.
How to use the Transmitter
1. Install the battery(1*6F22/9V) in the transmitter-ensure the polarity is correct.
2. Press mode button for 3 seconds and transmitter wil be TURN ON automatically and it will go into STANDBY MODE of not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
3. Press Mode button to choice the different mode(sound,vibration and static shock) and press the Up/Down button to set level.
4. Choose the different channels up to 3 receiver .
5. In standby mode,to turn on the transmitter,hold button at least 5 seconds,will wake it up.
Notes:These three modes could be combined freely,so please set those modes you don’t want at the level£¢0£¢.
Always turn on the transmitter when you change the new bettery every time.
Prepare the Collar Receiver
How to charge the Collar Receiver.
1. Connect the charger connector to the charging jack.
2. Plug the charger into a standard outlet.(DC-5V),the red LED light in side the Collar Receiver will be flash.
3. Charge the Collar Receiver at least 5 hours for the first charge.
4. After fully charged,the red LED light will be light.
5. When charging is completed,replace the rubber cover.
Notes:Low battery indicator:the Collar Receiver will keep beeping for 2 minutes unless it gets charged.
Connect the transmitter with the Collar Receiver.
1. Turn on the Transmitter and choose 3 channels to encode.
2. lift the Reset part of rubber cover in the Collar Receiver.
3. To turn on the receiver,with a pen or paper clip ,press the on/off button£¬the Collar Receiver will beep-it is now encoded to the transmitter.
4. To turn off the receiver,with a pen or paper clip,press and hold the on/off button for 3 seconds .the red LED light it turned off.
5. After turning on the receiver ,the Receiver is in the working mode and you could encode the transmitter and the Receiver with in 20 seconds.
6. In the working mode,if you want to reencode the Receiver ,simply with a pen or paper clip,press the on/off button,there is a beep sound to indicate that it is ready to encode.
Mistake prevention function
To prevent your pet from the mistake operation,this system set the working time up to 10 seconds each time.
Then you have to repress the operation button again to keep operation.
How to cheek the static is working
1. Use the test light LED-provided.attach the light to the metal probes-select Static mode-you can see static symbol on the sereen-press the launch button—the LED light will flash on.
2. Select a low number on the LCD display-put your fingers on the metal probes and press the launch button.
Notes for use:
1. The lifetime of the batteries vary according as how often you use the product.Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator sign on the LCD sereen of the transmitter.
2. The valid distance of remote control means the straight-line distance between the transmitter and the Collar Receiver without obstacles in between.if there are interference signals or signal screening around,the actual remote control distance may vary.
3. This product is for pet training.only by training,the pet can understand the intention of its owner.good effect can only be achieved after a perod of training .
4. Training sessions should be kept positive and short,about 10-15 minutes long each time.
5. Presently,this product is the most affective and safest tool for training pet.following the correct operational instructions,you can effectively train the pet and bring it on harm.
Receiver:3.7V 250mah Lip
Frequence:433MHz
Transmitter:6F22/9V
3 Collars Package included:
3X Remote transmitter
3X Rechargeable waterproof collar receiver
1X9V battery
3X Adjustable receiver collar
12XMetal contact points,
3XTest light tool
1XPower plug
1XUSB cable
1XUse Manual
2 Collars Package included:
1X Remote transmitter
2X Rechargeable waterproof collar receiver
1X9V battery
2X Adjustable receiver collar
8XMetal contact points,
2XTest light tool
1XPower plug
1XUSB cable
1XUse Manual
1 COLLAR Package included:
1X Remote transmitter
1X Rechargeable waterproof collar receiver
1X9V battery
1X Adjustable receiver collar
4XMetal contact points,
1XTest light tool
1XPower plug
1XUSB cable
Extra controller
The same controller with all items stated ablove .
Why we give you guys this option?
Many customer have above 3 dogs .extra controller will be a great Fitting for you guys and the price is very good .
?
Package contents:
1X Rechargeable waterproof collar receiver