Function introduction:
1. Automatically charge the battery.
2. The rectifier and brake circuit of this controller adopts an integrated module, which is more advanced than the traditional design in terms of heat dissipation and reliability.
3. Adopts a fully sealed and waterproof design, and its protection grade reaches above IP67. It can be used normally for a long time even in water.
Notes:1. Confirm that the output voltage of the wind turbine generator is consistent with the rating voltage of the battery.
2. Connect the wires in the following order, first connect the positive and negative poles of the battery, and then connect the three-phase voltage output of the fan.
3. Please connect the battery and wind turbine to the controller in strict accordance with the instructions. Reverse polarity or wrong position will lead to abnormal operation of the system or even complete damage to the controller.
Wiring mode:
1. Connect the positive and negative poles of the battery to the positive (red) and negative (black) terminals of the battery of the controller.
2. Respectively connect the three-phase output voltage of the wind turbine to the three-phase input (green line) terminal of the controller fan.
Parameters£º
1¡¢Maximum input AC voltage: AC35V;
2¡¢Output voltage: 12V / 24V;
3¡¢Battery charging cut-off voltage: 14.5V ¡¾ 0.3V / 29V ¡¾ 0.3V;
4¡¢Maximum charging current: 15A (12V) maximum charging current: 10A (24V);
5¡¢Wind driven generator speed limit voltage 14.5V ¡¾ 0.3V, 29V ¡¾ 0.3V;
6¡¢Protection level: IP67;
7¡¢Static power consumption: 0.008A;
8¡¢Bearing power: 800W;
9¡¢Maximum bearing wind speed: lvl.12;
10¡¢Working temperature: -35 ¡Æ C - 65 ¡Æ C
11¡¢Input wiring: three-wire system;
12¡¢Control mode: 12V/24V compatible;
13¡¢Installation method: bolted;
14¡¢Wiring is shown in the schematic figure; do not reverse the positive and negative poles to avoid burning the controller.
Packing list:
1*Wind Turbine Controlle
![](https://ae01.alicdn.com/kf/S61ef963f32354eab84e4c232f83aad67v.jpg)
![](https://ae01.alicdn.com/kf/S1b6e31a021d14e93a2ae4f62d9ca0376U.jpg)
![](https://ae01.alicdn.com/kf/S73d272bb0fab4749878769e662c48c00I.jpg)
![](https://ae01.alicdn.com/kf/Sca19f3b8f03748aa842ec79a8fc5af5cY.jpg)
See more product details
1.Efficient Power Generation: Wind Driven Generator Controller can be started at low pressure in a gentle breeze, and the energy is sufficient. Adopted MPPT boost charging technology to solve the problem that the fan speed is slow and cannot be charged.
2.Long Lasting Use: Light and compact in size design, which can be used in harsh environments of high and low temperatures - 35 C - 65 C, Waterproof Wind Generator Controller is filled with thermal conductive silica gel and well sealed, anti-circuit oxidation, durable, and wear-resistant.
3.Use Safely: Dustproof and waterproof, Wind Driven Generator Controller is more convenient to use and has overcharge protection, reverse connection protection, high-temperature protection, and short circuit protection.
4.Updated Technology: Greatly improving the charging capacity compared with the traditional PWM charging controller, Wind Generator Controller is more reliable to use and can promote energy conversion rate, enhancing the utilization efficiency of the power generation system.
5.Good Compatibility: Wind Turbine Controller is applicable to most wind turbines, easy to adjust and switch, and automatic identification of 12v/24v voltage.