This is NEW?Solar?Controller ,It can fully meet your home Photovoltaic system
(including?home lighting system?)requirements .
It can recongize 12V and 24V?Lead acid ,Gel battery?automatically?
If you want to use other type battery,you need to set up.
Such as Lithium battery charging,full protection 12.2V,discharge 9.5V,restart 11.5V.
There are optional 10A 20A 30A model?
10A:
if your battery is 12V ,the max solar panel input is 25V ?120W
if your battery is 24V ,the max solar panel input is 50V ?240W
20A:
If your battery is 12V, the max solar panel input is 25V ?240W
if your battery is 24V, the max solar panel input is 50V ?480W
30A:
if your battery is 12V ,the max solar panel input is 25V ?360W
if your battery is 24V ,the max solar panel input is 50V ?720W
Features:
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
MODEL | PWM 10A | PWM 20A | PWM 30A | PWM 40A | PWM 50A | PWM 60A |
Battery Voltage | 12V 24V Auto |
Charging Current | 10A | 20A | 30A | 40A | 50A | 60A |
Discharging Current | 10A | 10A | 10A | 20A | 30A | 30A |
Max Solar input | 50V(for 24V battery) 25V(for 12V battery) |
Equalization | 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
Float?charge | 13.7V(defaul,adjustable) |
Discharge stop | 10.7V(defaul,adjustable)10.7V(defaul,adjustable) |
Discharge reconnect | 12.6V(defaul,adjustable) |
Charge reconnect | 13V |
Voltage of open light | ? ? Solar Panel?8V(Light lights delay) |
Voltage of close light | Solar Panel?8V(Light off delay) |
USB output | 5V/3A |
Self-consume | <10mA |
Operating temperature | -35¡ÆC~+60¡ÆC |
Size | 133.5*70*35mm | 133.5*70*35mm |
*all red color voltage X2 ,while using 24V system.
Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!