|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ÂÃã °¡´É À¯¹«: ±×·¸½À´Ï´Ù
- Àç·á: PE
- ¸ðµ¨ ¹øÈ£: Best Heat Shrink Tube
- À¯Çü: ¿ ¼öÃà
- ¿ø»êÁö: Áß±¹
- Minimal shrinkage temperature: 70 Degrees Celsius
- Insulation strength: 15 kV / mm
- Full shrink temperature: 110 Degrees Celsius
- Shrinkage ratio: 2: 1 (reduction of 1/2 diameter)
- type 1: shrink wrapping
- type 2: Heat Shrinkable Sleeve
- type 3: Insulation Sleeving
- type 4: heat shrink insulation
- type 5: Heat Shrink Wrapping Kit
- type 6: heat gun for crafts
- type 7: heat gun mobile repair
- type 8: heat gun for car wrap
- type 9: heat gun for vinyl wrap
- type 10: mini heat gun
¿É¼ÇÁ¤º¸[(1254)164PCS Black][(129189672)164PCS White][(200004889)164PCS Blue][(200631109)328PCS Black][(200935607)328PCS White][(201447325)328PCS Blue]
Heat Shrink Tube Specifications : Material: Polyolefin Internal diameter: 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm Fully shrunk internal diameter: 0.5mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 7mm Length: 40mm Shrinkage Ratio: 2:1 (Max. shrink to 1 / 2 of its supplied diameter ) Minimum starting Shrinkage Temp: +70¡É Minimum full Shrinkage Temp: +125¡É Tensile strength: 10.4 Mpa Dielectric strength: 15kV / mm Cutting method: Scissors or sharp knife Flammability: Flame retardant Five Color in total: Yellow, Blue, Black, Green, Red
Hot Air Gun Description : Material :Steel Plastic Working temp.: 200 °C Rated Power: 300W Rated voltage: 220V 50-60Hz Plug Type: EU Plug(220v) Color:Blue,Black,White
Features: 1.Can be used to heating relief powder and shrinkable sheet. 2.Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed. 3.After completion, use the heat gun at high temperature to blow a few minutes. 4. it not only can add its hardness, but also its brightness. 5.The temprature can not adjustable, in theory, it can reach at 200 degree within a few seconds. 6.Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck. 7.Be carefull when using.
Package: 1 X Heat gun+164pcs or 328pcs Heat Shrink Tube
Note: Never touch the hot nozzle or melted glue for your sake. Keep it stay away from children.
|
|
|
|
|