|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- Ç÷¯±× À¯Çü: º¸Æí
- ¸ðµ¨ ¹øÈ£: Semiconductor refrigeration Module
- ºê·£µå À̸§: KYMISON
- ¿ø»êÁö: Áß±¹
¿É¼ÇÁ¤º¸[(350686)Single-Core Module][(350850)Dual-Core Module]
Reminder: This is not installed, just kit. It`ll need yourself install. It`s not suitable for pepole who are beginner and don`t know anything about the cooling system kit. We don`t offer any technical support.Please read carefully with the follow instrution and vedio before you purchasing. Thanks!
Video of assembly and DIY refrigerator https://v.youku.com/v_show/id_XMzY1NTMyMjg3Ng==.html?x&sharefrom=android&sharekey=ed93c142519d767f659c4dde596d32bc2
Vedeo of TEC1-12706 Peltier Use and Test https://v.youku.com/v_show/id_XMzYzMjYwOTE1Ng==.html?x&sharefrom=android&sharekey=5172bbfa810f9fa2771e243adcbce9e17
Product Specification
Single-core refrigeration module size: length 100mm*width 95mm total thickness 90m Dual-core refrigeration module size: length 200mm*width 95mm total thickness 90m Power of the whole machine: 12706 Peltier 72W+9025 cooling fan 3W+4010 cold end fan 1.5W=76.5W (76W under 15.4V, about 50W for single core and 100W for dual core under 12V voltage)
Semiconductor Chilling Plate: TEC1-12706 Fan: DC 12V Small Fan Size: 40 * 40 * 10mm Conduction Module Size: 60 * 45 * 21mm
Package List
Single-core refrigeration module Kit: 1 * TEC1-12706 2 * Fans(Large and Small) 1 *Single-core Radiator 1 * Outer Cover for Fan 1* Conduction Module 1 * Thermal Grease 1 * Thermal Insulation Gasket 1 * Pack of Screws
Dual-core refrigeration module Kit: 2 * TEC1-12706 4 * Fans(Large and Small) 1 *Dual-core Radiator 2 * Outer Cover for Fan 2* Conduction Module 2 * Thermal Grease 2 * Thermal Insulation Gasket 2 * Pack of Screws
Assembly steps:
1,The middle of the insulation cotton is removed, the two holes are aligned with the heat sink, the sticky side is on the outside, and the foam box can be glued tightly when the foam box is installed later.
2,The blank surface of the peltier (no literal) is evenly coated with thermal grease and attached to the radiator (a thin layer is sufficient when applying, not too thick)
3,The Peltier is literally the cooling surface, and it also needs to be evenly coated with thermal grease (a thin layer is sufficient when applying, not too thick)
4,The conduction module is installed, and the gasket is added to the head and bottom of the screw respectively
5,When rotating the screw, the two screws should be evenly stressed at the same time, and they should not be pushed up to the bottom at the same time, so as to prevent the peltier from being damaged due to uneven force.
6,Install a small fan at the cold end, or you can choose not to install it (the temperature of the working space of the fan is uniform, and it is not easy to frost)
7,The 9cm fan with the label surface is the air outlet, blowing against the heat sink
8,The peltier and the fan can be connected in parallel, the red is connected to the positive electrode, and the black is connected to the negative electrode
Effect diagram after power-on (cooling temperature is closely related to environment, space, heat preservation, etc., the specific cooling effect varies from person to person):
|
|
|
|
|