SMC01 DC5-30V Stepper Motor Controller Positive Reverse Angle Pulse Speed Control Board Programmable PLC Serial Communication
Features:
1: Widely used
2: LCD display
3: Automatic manual multi-mode
4: TTL serial communication
5: The main functions of the system: automatic, manual, setting, serial port control
Product Introduction:
This is an operation control module specifically for single-axis stepper motors. The module has a variety of fixed operating modes built-in, and the user can quickly select the appropriate motion track. You can save and set the distance/speed/delay/cycle times after power-off. It can run independently as a module, or it can be used with other systems. It can be used in general industrial control occasions, but cannot be used in special industries such as medical treatment and fire fighting or life-critical fields.
System Parameters:
Model: ZK-SMC01 Step Motor Controller
Adapted motor: stepper motor
Number of control axes: single axis
Motor signal: common cathode
Power supply range: DC 5-30V universal
Instruction features: streamline and optimize multiple commonly used instructions
Acceleration and deceleration control: Yes
Input reverse connection protection: Yes
Remote communication control: TTL serial port
Main functions of the system: automatic, manual, setting, serial port control
Speed range: 0.1~999 laps/minute
Number of forward pulses: 1-9999 pulses
Number of reverse pulses: 1-9999 pulses
Cycle work times: 1-9999 times
Forward delay time: 0.0-999.9 seconds
Reversal delay time: 0.0-999.9 seconds
Subdivision selection range: 1-128 subdivision
Product use environment: -5¡É-60¡É (non-condensing)
Product List:
1*stepper motor controller
1*plug wire