Introduction:
16A 10mA integrated plug (MCAL 1-16 / I) 16A-250V
CCC certification This product meets the new standard: GB20044?2005
Function and use: MCAL 1-16/I series residual current (leakage) protection plug is suitable for single-phase circuit with AC rated voltage of 187V~242V and rated current of 16A. Its main protection function is to quickly cut off the power automatically within 0.1 seconds for personal injury caused by fatal danger, which not only protects personal safety but also protects electrical equipment from damage. It can also be used as a supplementary protection for direct contact when other protection measures fail. This product has passed the national compulsory certification and obtained the CCC certificate.
Widely used in: 1, household appliances: electric water heaters (shower, solar water heaters), electric hot water taps, radiators, water heaters, washing machines, refrigerators, freezers, disinfection cabinets, dishwashers, microwave ovens, rice cookers, ovens , heaters, household water pumps, electric fans, air conditioners, kitchen appliances, etc.; 2. Mobile categories: electric drills, electric hammers, chainsaws, electric planers, portable electric sewing machines, blowers, testing instruments with metal casings, instruments, medical appliances With haircuts, hairdressing appliances, etc.
Features:
1. It adopts imported special-purpose integrated circuit, which has reliable performance, strong anti-interference ability and good impact voltage resistance; it is sensitive and does not malfunction.
2. Working voltage range: 187V~242V can work normally.
3, product serialization, can adapt to the different needs of users, and a variety of single-phase electrical equipment.
4, the use is extremely convenient, where to protect the plug, safe use of electricity to protect where
Installation and use:
1. Open the rear cover of the plug, peel off the insulation layer at the output end of the electrical power cord, insert the plug terminal, tighten the fastening screw with a screwdriver, and pay attention to the correct connection of fire, zero and ground.
2. Close the rear cover and tighten the fastening screws.
3. After confirming that the connection is correct, insert the protection plug directly into the fixed socket.
4. Test before use to verify whether the protection plug can work normally. For example, press the test button (simulated human body electric shock), the leakage protection plug can be operated, and then press the reset button, the indicator light is on, and it can be put into normal use.
![](https://ae01.alicdn.com/kf/Hbdb41d58001e4dfa96fd8529a6a265e2P.jpg)
![](https://ae01.alicdn.com/kf/H02dabe61e1704452b59d7559371f8b350.jpg)
![](https://ae01.alicdn.com/kf/H8454fa75efb64a5c809496e0fa9f6370L.jpg)
![](https://ae01.alicdn.com/kf/H164d2fa4b6964dea94f76b4b80fb4239d.jpg)