set2: 1 x Inverter boost module + 1 x 500W Inverter Boost Board
1. The board belongs to high frequency square AC output; it is not suitable for the inductive appliance, such as motor, fan and coil transformer.
2. While picked up with low-load machines (LED light, mobile phone charger and DVD set-top box), you are suggested to pick up with low voltage point, such as: 172V/110V.
3. You should install a large heat sink to release its long time high-load (About 100W) work.
4. You could not connect the power inversely. Besides, power supply and power wire should have large enough current. 5. Do not overload and short-circuit because it without any protections.
Power: 500W
Input: DC12V (requires 24V to take a message)
Output: AC220V 380V and AC18V
Quiescent current: 0.35A
Output waveform: high frequency square wave
Protection: no protection
Pcb board size 8 cm x 7.5 cm
note:
1.This board is a high-frequency square wave AC output, so the general inductive appliances can not bring!such as: motor, electric fan, coil transformer, etc.
Another: simple resistance and resistance step-down small appliances, cheap resistance to resist buck LED lamps, etc. may not be used
2.When connecting to a small load (LED lights, mobile phone charger, DVD set-top box, etc.),it is recommended to connect the output voltage to a low point such as: 160V
6. The number in measured by the output high frequency non-load voltage meter will be a little higher.
Output wiring the following voltages:
V0--V2=110V
V0--V3=175V
V0--V4=200V
V0--V5=220V
V5--V4=20V
V5--V3=45V
V5--V2=110V
V4--V3=28V
V4--V2=90V
V3--V2=62V
Power: 150W
Input voltage: DC12V
Output voltage: AC 0-110V-172V-200V-220V
Quiescent current: about 0.05A
Output waveform: high frequency square wave
Output frequency: about 20KHZ
colour:blue
Material:PCB/metal+PC
Inverter boost module size:50x50x40mm
Package Contents:
1 x Inverter boost module
1 x 500W Inverter Boost Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.