JK13 AC 220V 10A Timer Delay Switch Relay Module Adjustable 1 -99 Minutes Trigger Countdown Circuit Switch Board LED Display for Car
Feature:
It adopts RC (resistor and capacitor) to step down, and the output is 220V active voltage, which can be controlled by directly connecting the load.
When trigger starts countdown, the relay is immediately turned on. And the relay is turned off after the countdown ends.(During countdown,trigger again,timer interrupt,and relay disconnect)
Specification:
Input Voltage: 220V AC
Power consumption: 1W
Time range: 1 -99 minutes
Display: 2 Red LED Digit Tube
Time adjustment: Potentiometer (500K), dynamically displayed on the digital tube during adjustment
Accuracy: 1 (seconds or minutes, set according to jumpers)
Error: 2%
Trigger mode: Shorted for more than 0.02 seconds
Output contact: a set of normally open + normally closed
Output capacity: 10A (voltage range 0-250V AC, or 0-30V DC)
Output mode: Active output (only control on / off of the live wire), normally open + normally closed
Dimensions: 9x4cm/3.54x1.57inch
Note:
The `relay on` in the description refers to the connection between the `common` and `normally open` of the relay, that is, the output of the moving contact.
Manual measurement, with small error. Please check size in detail before purchase.
Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
Package Included:
1 * AC 220V Timer Delay Relay 1-99 Minutes